
TONELUX
Hardware
Click on images for more details
1628 16-channel Console - MIXING SYSTEMS
This 1628 is the new fully loaded mixing console from Tonelux. The desk comes pre-wired with the following modules: • 16) MX2 Mix Modules• 16) EQ4P Equalizers • 16) TR8 Bus Assign Modules • 16) MP1a Mic Preamps with TILT • 4) FX2+ Send Master/FX Returns • 1) SM2 Stereo Master Module • 1) CR2 Control...
A - The Configulizer - MIXING SYSTEMS
Click here to use The Configulizer...
Aux1 - Bus Access Module - MIXING SYSTEMS
£276 exluding VAT
The AUX1 The AUX1 is a simple BUS access module that allows the user to insert an additional mixer, mic pre, etc. into the Tonelux MIX BUS. Each input is BALANCED and is calibrated for a level of +4 dBu. The LED at the bottom of the module indicates the mode that the AUX1 is in. Internally, there are headers that allow you to switch the jacks from the MX2 Stereo Mixer...
Cr2 - Control Room Module - MIXING SYSTEMS
£767.15 exluding VAT
The CR2The CR2 is a FULL featured CONTROL ROOM MONITOR module that has three external stereo inputs and the internal stereo mix bus. The CR2 uses an ALL DISCRETE signal path for superb sonic quality. The features include AFL stereo level, which is switched on when ever a channel is soloed, TWO control room speaker outputs, a MONO compatibility switch, left and right speaker...
Eq4p - 4 Band Parametric Eq Module - MIXING SYSTEMS
£798 exluding VAT
The EQ4PThe EQ4P is a DISCRETE Parametric Equalizer with some very unique features. Notice that the panel has no Q control. The filter Q control is in relation to the Boost and Cut control, and uses a "Constant Energy Curve" that keeps the bandwidth wider at lower boost or cut levels and becomes narrow at higher boost or cut levels. This is musically pleasing. The...
Eq5p 500 Series - MIXING SYSTEMS
This product is available to hire
This is the new 500 series version of the EQ4P:The EQ4P is a DISCRETE Parametric Equalizer with some very unique features. Notice that the panel has no Q control. The filter Q control is in relation to the Boost and Cut control, and uses a "Constant Energy Curve" that keeps the bandwidth wider at lower boost or cut levels and becomes narrow at higher boost or cut levels. This is musically...
Equalux - Parametric Equalizer - EQUALIZERS
£1860 exluding VAT
The EQUALUX is a DISCRETE Parametric Equalizer with some unique features. Notice that the panul had no Q control. The filter Q control is in relation to the Boost and Cut control and used a "Constant Energy Curve" or known as "Proportional Q" that keeps the bandwidth wider at lower boost or cut levels and becomes nattow at higher boost or cut levels. The is very musically...
Fd1 & Fd2 - Mono & Stereo Fader Module - MIXING SYSTEMS
£226.80 exluding VAT
The FD1 The FD1 Fader is a mono 100mm fader. The price includes a 2 foot TRS cable that plugs into the rear of the MX2, MX5.2 or the SM1, SM2 as well as the FX2 external fader jack on the rear of the VRACK. The FD2 The FD2 Fader is a stereo 100mm fader. The price includes a pair of 2 foot TRS cables that plug into the rear of the SM2 external fader jack on...
Fx2 - Dual Mono Line Mixer Module - MIXING SYSTEMS
£360 exluding VAT
The FX2 The FX2 Mixer is a DUAL mono input line mixer with a simple pair of level controls and a pair of panners. The PAN control is a standard stereo pan circuit with a center detent. The FX2 has a unique MUTE circuit that when pressed, the LED turns RED, but when the module is ON, the LED serves as a level presence indicator, illuminating green to show signal presence. ...
Fx2+ - Dual Mono Line Mixer Module With Aux Master - MIXING SYSTEMS
£424.28 exluding VAT
The FX2+ The FX2+ Mixer is the same as the FX2 Module (a DUAL mono input line mixer with a simple pair of level controls and a pair of panners), but with an additional AUX MASTER. Please click here for further details of the FX2 module.The FX2+ send master option uses the all discrete TX-260 output stage with the TX-280 transformer. The FX2+ "AUX MSTR" is an...
Lfe - Low Frequency Effects Module - MIXING SYSTEMS
£450 exluding VAT
The LFEThe LFE module is a Low Frequency Effect module that controls the LFE channel for a sub-woofer in either stereo or surround. It is a management module that controls the level of the low frequencies from 3 sources. The Knob at the top, OUTPUT LEVEL, is the master output level and is intended to be run full cloclwise. The next function is a button that ...
Mp1a - Mic Pre-amp Module - PRE AMPS & DI'S
£628.80 exluding VAT
The MP1aThe MP1a is a DISCRETE mic preamp with a DIRECT INPUT on the front panel. The MIC IN is a transformer coupled in and out, and has a 20dB PAD switch (effects both MIC and DIR), a 48V Phantom switch and a Phase or POLARITY switch.The PAD and POLARITY switches effect both inputs. Identical to the MP1, but with the addition of an OUTPUT FADER to control the record level of the Mic...
Mp5a 500 Series - MIXING SYSTEMS
This is the new 500 Series version of the MP1a:The MP1a is a DISCRETE mic preamp with a DIRECT INPUT on the front panel. The MIC IN is a transformer coupled in and out, and has a 20dB PAD switch (effects both MIC and DIR), a 48V Phantom switch and a Phase or POLARITY switch.The PAD and POLARITY switches effect both inputs. Identical to the MP1, but with the addition of an OUTPUT...
Mx2 - Stereo Line Mixer Module - MIXING SYSTEMS
£372.85 exluding VAT
The MX2 The MX2 Mixer is a mono input line mixer with many features of a large frame console. The MX2 has a unique MUTE circuit that when pressed, the LED turns RED, but when the module is ON, the LED serves as a level presence indicator, illuminating green to show signal presence. This is very useful in live recording when you need to know quickly if a channel has signal or...
Mx5.1 - 5.1 Line Mixer Module - MIXING SYSTEMS
£414 exluding VAT
The MX5.1 The MX5.1 Mixer is a SURROUND mono input line mixer with many features of a large frame console. The MX5.1 has a unique MUTE circuit that when pressed, the LED turns RED, but when the module is ON, the LED serves as a level presence indicator, illuminating green to show signal presence. This is very useful in live recording when you need to know quickly if a...
Sm1 - Mono Summing Module - MIXING SYSTEMS
£354 exluding VAT
The SM1 The SM1 is a DISCRETE Mono Summing module, with a selectable input (on the PC board with jumpers) so you can grab any bus and use the SM1 as the summing master for the bus, such as Sends, Center Channel, LFE, PFL, etc. The 8 seg LED VU meter follows the output of the final stage. The Summing input uses the Tonelux DISCRETE op-amp for summing, then feeds the Tonelux...
Sm2 - Stereo Summing Module - MIXING SYSTEMS
£767.15 exluding VAT
The SM2 The SM2 is a STEREO DISCRETE Summing module, with selectable inputs (on the PC board with jumpers) so you can grab any pair of bus and use the SM2 as the summing master for the Stereo bus, Surround Bus or the Solo Bus, etc. The two 8 seg LED VU meters follows the outputs of the both final stages. The Summing inputs use the Tonelux DISCRETE op-amp for summing, then feeds...
Tb1 - Talkback Module - MIXING SYSTEMS
£450 exluding VAT
The TB1The module is available now. Further data TBA ...
Tilt - FILTERS
The TILT is an 8 channel tilt box with polarity switches and the famous TILT control. Perfect for a quick 8 channels of EQ on Drums, Room, Audience, WHATEVER YOU NEED FAST!...
Tr8 - Bus Assigning Module - MIXING SYSTEMS
£360 exluding VAT
The TR8The TR8 Bus Assign module is a mono input line level module with a simple level control and a panner.The PAN control is a standard stereo pan circuit with a center detent.The TR8 uses the proprietary all discrete TX-240 op-amp.The TR8 can be used by itself as an inexpensive mono in, 8 out mixer for DAW or LIVE use when a flexable module is required with multiple outputs. It can...
Tr8+ - Bus Assigning Module - MIXING SYSTEMS
£424.28 exluding VAT
The TR8+The TR8+ Bus Assign module is the same as the TR8 (a mono input line level module with a simple level control and a panner), but with an additional Bus Master.Please click here for further details of the TR8.The TR8+ bus master option uses the all discrete TX-260 output stage with the TX-280 transformer.The TR8+ "BUS MASTER" is an OPTIONAL bus master control, which is...
Tx5c 500 Series - MIXING SYSTEMS
This product is available to hire
This is the new 500 series version of the TXC: The TXC is the new design from Paul Wolff that addresses the complex issues with compression. With the ability to do in-module parallel mixing of the dry signal and the compressed signal, the engineer can now enjoy the parallel or "side chaining" of an instrument with itself and come up with the perfect blend of the original and...
Txc - Compressor Module - MIXING SYSTEMS
£798 exluding VAT
The TXCThe TXC is the new design from Paul Wolff that addresses the complex issues with compression. With the ability to do in-module parallel mixing of the dry signal and the compressed signal, the engineer can now enjoy the parallel or "side chaining" of an instrument with itself and come up with the perfect blend of the original and compressed signal without the problems associated with...
V4 Roadster 500 Series Rack - MIXING SYSTEMS
The V4 Roadster is a new 4 slot portable rack for Tonelux's new range of 500 series modules. ...
V4 Roadster 500 Series Rack Expander - MIXING SYSTEMS
This is the 4 slot expander rack for the new 500 series V4 Roadster. ...
V8 Roadster - Portable Rack - MIXING SYSTEMS
£675.60 exluding VAT
This product is available to hire
THE NEW "V8" 8 Slot Portable Rack The new Tonelux V8 includes many features not found on any other rack system available today. The new rack can house up to 8 Mic Pres, Eqs and Compressors, in any combination. The rack can also house any of the MIXING modules, including the MX2, FX2, MX5.1, SM2, TR8, and the CR2 for monitoring. The system pictured above is an...
Vrack - 16 Position Rack - MIXING SYSTEMS
£427.72 exluding VAT
The VRACKThis is a rack mountable unit that can house 16 (1 slot) Tonelux modules. ...
Vu4 - Vu Meter Module - MIXING SYSTEMS
£504 exluding VAT
The VU4The VU4 is a FOUR CHANNEL VU Meter panel that fits into four V-Rack slots. The INPUT D-sub feeds the main input and the INSERT D-sub feeds the alternate input, selected by the front panel "IN" button. Additionally, the INPUT d-sub is internally MULTED to the OUTPUT D-sub, eliminating the need for Y cables and external mults. The REF level is...


